Wednesday, April 25, 2012

12 Types of Carpet

The carpet market is a huge market, with lots of types to select from. Here are 12 different types of carpet and what they will offer you and your home.

Woven

Lay-In Thread

Woven carpet is produced on a loom that is very similar to woven cloth, being cut pile. There are numerous different colored yarns being used and the whole process is capable of producing very intricate patterns from designs that are pre-determined. Generally, woven is the highest quality of carpet available.

12 Types of Carpet

Tufted

This type of carpet is produced on a tufting machine by using either a single colored or sometimes a non colored yarn. If non colored is being used, then the carpet will be dyed or printed with a design as a separate process. Carpets that are tufted can either be cut pile, loop pile, or a combination of both. Machines can produce a lot more meters of carpet than weaving, and they are usually at the lower end of the market.

Needlefelt

The needlefelt type of carpet is a bit more technologically advanced. They are produced by electrostatic attraction of individual fibers that form a unique carpet with extremely high durability. You can normally find needlefelt carpet in the contract market such as in hotels or other places where there is always going to be a lot of traffic.

Flatweave

The flatweave carpet is created by interlocking warp and weft threads. The types of oriental flatwoven carpet include soumak, plain weave, and tapestry weave. This type is not well known in the North American region, although it is very popular in the orient and Japan.

Hooked rug

This is a simple construction of rug that is handmade by pulling strips of cloth such as wool or cotton through the meshes of a very sturdy fabric. Now, this type of rug is generally known as a handicraft.

Knotted pile

With knotted pile carpets, the structural weft threads will alternate with a supplementary weft that will rise from the surface of the weave at a perpendicular angle.

Cut and loop piles

The cut and loop pile combines both looped and cut fibers. They provide a variety of surface textures for medium durability. Cut and loop carpets are available in either solid or different colors. The several different layers in this carpet can hide dirt and footprints in formal and informal areas.

Saxony

Saxony consists of tightly twisted cut piles that are heat set straight. They consist of two or more fibers that have been twisted together in a yarn, and they provide a very soft texture for informal as well as formal areas. They will show each and every footprint and even marks from vacuum cleaners.

Textured saxony

Textured carpet is the best selling and it works well in informal areas due to the very soft feel. They are tightly twisted and texture headset for medium durability. They also offer a multi colored look that will hide tracks and footprints.

Plush/velvet

Both plush and velvet are lightly twisted and offer a uniform color. They are very soft and offer more level than textures. This type of carpet is ideal for formal areas due to it's luxurious appearance.

Frieze

Frieze is a highly twisted cut pile type of carpet that is suited for high traffic areas. It has short fibers that will tend to curl in different directions at the surface to hide footprints and vacuum marks.

Level loop pile

The level loop pile is constructed by weaving even loops of yarn into carpet backing at both ends. This type of carpet is durable as well as track resistant, due to the strong loops. Higher loops in the carpet will create a more luxurious look. They are also great because they will prevent dirt from filtering on into the carpet.

12 Types of Carpet

Do you know these common carpet cleaning scams? Do not underestimate them! They can cost you a lot of money. Click here now to learn more.

Relate Link Cheap B Makowsky Handbags Shoulder Sale Ak Anne Klein Crystal Watch Cheap

Monday, April 23, 2012

Advantages and Disadvantages of Plastic Surgery

When it comes to the advantages and disadvantages of plastic surgery, you really have to look in more depth on the specific procedure you plan on having done. Although each possible procedure has its own list of pros and cons associated with it, they can all be generalized for simplicity. The biggest disadvantages associated with plastic surgery are the risks as well as the price tag, however when compared to the benefits, these will usually outweigh the disadvantages of plastic surgery. For starters, whether you are having a reconstructive procedure or a cosmetic procedure, the goal is to make yourself look better.

While some people who decide to undergo the knife may already look great, there are many others who have been teased and taunted their entire life about their features. Not only do years of teasing and taunting take their toll on a person's emotional well being, but a person who does not like something about themselves will also cause an emotional scar. Since who we are has a lot to do with our emotions, then it is safe to say that even the smallest procedure that effects our self esteem in a positive manor can outwardly make you seen as a whole new person. Isn't it what it is all about, changing ourselves so not only we look better, but feel better as well?

Serger

The obvious risks associated with plastic surgery are the possibilities of not only having a complication, but also receiving bad work. No wants to pay a substantial amount of money to end up looking worse than before they went in for the procedure. On top of this, there is also no one who wants to pay to have a procedure dine just so they can have nerves damaged.

Advantages and Disadvantages of Plastic Surgery

In order to better understand the advantages and disadvantages of plastic surgery, you really have to talk with the surgeon who will be in charge of your procedure so that he or she can better explain the risks. It is also important that you are as well informed as you can be in case you have to make a decision as it is better to make an informed decision rather than a guess.

Advantages and Disadvantages of Plastic Surgery

Dr. Jim Greene would like to provide you more in depth information that will help you make a sound decision regarding:

Plastic surgery

Reconstructive surgery

Surgery

Relate Link Buy B Makowsky Handbags Hobo Cheap Buy Cuisinart Cookware Set Cheap

Sunday, April 22, 2012

The Top 10 Tiling Mistakes or How To Lay Tile Properly

Tiling is one of the popular home improvement do-it-yourself tasks, and many homeowners assume they can do it without much preparation. However, if you want a quality result right away, it is essential to pay attention to a number of important issues. Nothing says "do-it-yourselfer" louder than a make-do solution when tiling.

Here are 10 of the most common mistakes made during tile installation:

Lay-In Thread

10) Not preparing the surfaces well enough

The Top 10 Tiling Mistakes or How To Lay Tile Properly

It is important to clean and smooth the surface which you will be laying tile on thoroughly. Trying to save time on this step can lead to an uneven and instable tiling. Any wallpaper or other foreign coatings should be removed prior to tiling.

9) Grouting unevenly or too quickly

Ideally you should spread the grout evenly and slowly, using a support tool like a squeegee. If you try to be too fast and grout a large area before laying tile, the grout on far-off spots may dry out before you actually get to tile. Distributing grout too hastily also is likely to lead to an uneven tiling result. Also, it is important to remove any excess grout immediately after laying tile, because it will be much harder to do once it has dried up.

8) Dotting corners

Some people believe that by adding dots of adhesive to the corners of tiles they achieve a stronger bond. However, by doing so you actually increases the chance of cracking because the adhesive shrinks as it dries. With the adhesive being thicker in some areas (for instance in the corners), the shrinking will add pressure on the tile.

7) Choosing the wrong adhesive

This is particularly important for laying tile in humid rooms like bathrooms and swimming pools. In such cases waterproof adhesive is a must. Even well-fitted tiles can let some water through to the adhesive, which eventually calles crumbling and breaking with non-waterproof adhesives.

6) Not using battens

Optimally you should use battens (thin rods of wood, alternatively any other long straight object) both in horizontal and vertical directions to lay tiles in possibly straight lines. Trying to lay tile without such a helper tool will often result in positioning mistakes and a generally bad look of the tiled surface.

5) Not discovering and fixing mistakes quickly enough

A rare first-time tiling job gets done flawlessly right away. Most likely, you will have a few awkward spots here and there. It is important to have a fresh eye look over your tiling result shortly after you are done, ideally within the first 6-12 hours. The faster you spot problems, the easier it is to fix them. A misplaced tile 24+ hours after you're done can be quite difficult to fix since the grout will already have hardened.

4) Not removing excess grout accurately

One of the most common signs of an amateur tiling, protruding grout is something that is easy to fix.

3) Miscalculations with the number of tiles needed

Some first-time tilers will just buy exactly the number of tiles to cover the area they want to tile. However, in practice, you should get 5%-10% more tiles than the minimum to insure yourself against breakages, miscalculations and difficulties cutting to size. This also gives you some spare tiles to replace cracked ones in future.

2) Failing to seal bath tops properly

If the gap between the bottom row of tiles and the bath top is not sealed properly, water may leak into it as it runs down the tiles. Usually it is recommended to fill the bath before using the sealant, since baths can move significantly when filled with water, which can strain and crack sealant if it is not anticipated.

1) Insufficient or erroneous planning

This is probably the most important mistake, and also the one which is easiest to avoid. Instead of going for a make-do solution, always be sure to measure out the surface you need to tile carefully. Be aware that installing curved tile is significantly more difficult than tiling a flat wall. Plan for at least 10-15% waste and spare tiles for future replacements. Try to keep it simple. Cutting tile can be frustrating and expensive, so the fewer cuts you make, the less expensive your project is.

Don't hesitate to read up materials purchase some of the inexpensive video lessons (for instance the ones available at http://www.tilehowto.com). For a larger project, perhaps even arrange a brief designer consultation - an experienced eye can often discern problems that might cost you hundreds to fix afterwards.

The Top 10 Tiling Mistakes or How To Lay Tile Properly

Relate Link Buy Cuisinart Cookware Set Cheap

Friday, April 20, 2012

Gravel Driveways Are a Great Alternative to Concrete Or Asphalt

Gravel driveways have a kind of elegance about them that concrete or asphalt fails to show. Unlike gravel, which is much more flexible in that respect, these materials are difficult to correct if they were not laid properly to begin with.

How many stately homes have you seen in movies where a limousine drives up the sweeping driveway made of concrete or even asphalt? It's the characteristic crunch or gravel under car tyres that typify those movie scenes. Perhaps that's why we associate gravel driveways with class and style.

Lay-In Thread

A gravel driveway isn't difficult to prepare and fill. In many ways it's less difficult than concrete, which is messy and difficult to achieve a great looking surface with. Asphalt is easier to lay, and easier to have looking good, but it's costly and it can be a bit messy too. Concrete and asphalt are not particularly easy to maintain either.

Gravel Driveways Are a Great Alternative to Concrete Or Asphalt

Concrete and asphalt do score well when it comes to cracking as a result of extreme frost and cold, but gravel scores even better. Heavy rains just drain away with a gravel driveway while concrete and asphalt need drainage considerations built in from the start.

Gravel driveways don't have to be boring. They can be made from a variety of different coloured stone of reds, blues and greys. You can even use different coloured stone to form patterns on large areas to provide a bit of contrast.

It's important that you prepare properly for any gravel driveways you plan to create. As with other surface materials, a rule of thumb guide is the more heavy use your driveway is likely to get, the deeper and more robust the driveway should be.

In other words, if your gravel driveways will only have people walking on them, then you can get away with a relatively shallow depth. If a car will travel on it, then it needs to be deep enough to cope with the additional wear and tear.

Gravel driveways should be prepared by having the drive marked out and dug down to a depth of about 150 millimetres, or six inches. At that point, drive a wooden peg into the dug out ground. If it is difficult to drive down further, then the base is solid and firm. If not, you may have to dig deeper. If you encounter any soft spots they may also need digging out.

You should lay a base before laying the gravel. Scalping stone is leftover quarry material and makes an excellent inexpensive base. Order it during dry weather as rain will add considerably to the weight, which is what you will charged on. The scalping stone should be compacted by being vibrated in to a depth of at least 75 millimetres.

Your driveway is now ready to accept the gravel. There are various sizes of gravel stone you can use. A size of 10 millimetres is probably too small as the stones will become wedged into most car threads. Stone of 40 millimetres size is generally too large, so the best all round size to use is gravel of 20 millimetres. Gravel driveways are a joy to have, easy to maintain and will look great for a long time to come.

Gravel Driveways Are a Great Alternative to Concrete Or Asphalt

David A Robinson
Help and information about using gravel for driveways and gardens.

Relate Link Akribos XXIV Time Machine Watch Cheap Buy Cuisinart Cookware Set Cheap

Wednesday, April 18, 2012

Homemade Baby Slings - How to Make Your Own Baby Sling!

As many hip parents know, baby slings have become an increasingly popular mode of transporting your infant or toddler around - from A-list celebrities spotted wearing a designer Baby Bjorn with baby in tow, to everyday moms and dads on the go who choose to use a variety of baby slings and carriers, the baby carrier is the way to carry your little one in style!

Saving Green...

Serger

With today's ever-tightening economy, some parents are choosing to get crafty - and get sewing! While there are many gifted homemakers who enjoy making their own baby clothes, others are merely looking to save a penny or two and design their own easy-to-sew or no-sew baby wrap.

Homemade Baby Slings - How to Make Your Own Baby Sling!

Going Green...

There are also environmentally-conscious parents who would prefer to start their child's life on a green note - and organic baby slings are easily made, using natural fibers and textiles (such as hemp and unbleached cotton) as eco-friendly alternatives to synthetic materials used in traditional baby carriers.

Making a Scene!

Still others choose to express their creative side - crocheting, knitting and hand-stitching hip baby slings to suit their own personal style, crafty folks everywhere can consult a multitude of craft magazines and websites for how-to's and blogs when creating their own original baby sling designs.

Ready, Set...Sew!

So, whether you're on a budget, looking to express your artistic or creative side, or simply trying to live a greener lifestyle, it's easy to make your own cheap baby slings - below, DIY instructions to sew your own baby wrap!

HOW TO MAKE BABY SLINGS:

For anyone who has basic sewing skills, this is a fairly simple project:

1. First, choose your fabric at a local fabric store - since you will be sewing (or serging) the edges, you may choose woven cloth that is unfinished, as well as fleeces and cotton knits, as long as they don't curl up when cut.

2. Next, cut your cloth to the proper dimension - if you're purchasing your fabric in person, the salesperson can cut the cloth to your specifications; we recommend 20 to 35" wide and at least 5 yards (15 feet) long.

3. Finally, you will finish the edges by serging all four sides of the material.

If you do not have your own serger, we recommend hemming all the way around the four sides of the baby wrap. You may also choose to visit your local sewing machine store, which might let you borrow their serger for free or for a small fee; visiting a tailor or dry cleaners is another affordable option for finishing your baby wrap.

IMPORTANT TIP: DO NOT buy 2.5 yards of 2 different materials & sew them together to create 5 yards - this will result in a WEIGHT-BEARING seam, weakening your baby wrap & making it less safe!

Although this is a moderately easy sling project for some, sewing isn't quite an option for everyone, especially when you consider what you're transporting! For the rest of us less-than-crafty folks who want to carry their precious cargo stylishly (and safely!), it's not difficult to find inexpensive and cheap baby slings. There are many online sources, including Babysling.com, where you can find a great assortment of affordable baby slings & infant slings, including the ERGO baby carrier, Hotslings brand, Moby Wrap, Maya, Ellaroo, Baby K'Tan baby carrier and more! Whether you're looking for a baby backpack, a linen baby sling, a Velcro sling, organic slings or any other type of kid sling, you're sure to find a wonderful selection of moderately-priced, eco-friendly and stylish options at Babysling.com!

Homemade Baby Slings - How to Make Your Own Baby Sling!

Philip Morrison is an advocate of baby wearing, having experienced the benefits for him and his two children after wearing them during their early years. At Babysling.com, find all kind of baby slings and carriers from Hotsling, Maya Wrap and more directly from the online store.

Relate Link Buy B Makowsky Handbags Hobo Cheap

Monday, April 16, 2012

2 Sewing Techniques On How To Sew A Reversible Vest

Here are two sewing techniques plus some good sewing tips on how to sew a reversible vest or a lined vest. One is stitched and turned; the other is stitched and bound.

Try both to help you determine your favorite sewing technique.

Lay-In Thread

For both methods, follow these cutting and sewing instructions:

2 Sewing Techniques On How To Sew A Reversible Vest

Choose similar weight fabrics for a reversible vest.

Preshrink all fabrics and interfacing.

Interface the vest with a fusible knit interfacing.

Test the interfacing on a scrap of fabric first to make sure it will be OK.

Depending on the fabric, you may choose to interface both of the fronts and back of the vest.

Note: You may want to interface the fabric and then cut the vest pieces out of the interfaced fabric.

Carefully cut two fronts and one back from each fabric.

Make sure the front and back vest pieces are the same size in both fabrics after you cut them out. Lay one over the other to check it.

Apply any pockets or designs to each front and back layer.

For each layer:

Place right sides of the fabric together and stitch the front and back shoulder seams together. Do NOT backstitch.

Instead begin and end each seam with short stitches (18-20 per inch) for about 1 to 1-1/2 inches.

Sandwich press the seams.

Press the seams open.

At the neck and shoulder point of the shoulder seam, trim the shoulder seam allowance back at an angle for about 1-1/2 inch to eliminate bulk when the neck and armhole seams are made.

Also trim the shoulder seams of one of the layers to be just slightly less than the other layer to stagger or grade the seams when they lay on top of each other.

Continue with either Method I or Method II to finish the vest.

Method I - How To Sew To Complete A Stitched And Turned Reversible Vest

Place the two vests right sides together.

Note: Generally, when sewing a lined vest, it is a good idea to trim off about 1/8 inch from the lining before attaching it to the outer layer. This keeps the lining from showing on the outside when the vest is worn.

For a reversible vest, you may or may not want to do this.

If a bit of one of the layers shows on one of the sides, it may look like narrow piping. You are the designer. Create the look you want.

Stitch the vests armhole edges together using short stitches (18-20 stitches per inch) all the way.

Sandwich press these seams.

Press the seams open.

Trim the armhole seams to 1/8 inch seam allowance. The short stitches will hold this seam.

If this is a lined vest, understitch the armhole seams and all of the other seams as well. If it is reversible, you may not want the understitching to show on the edge.

Sewing Tip: Always use short stitches and trim to 1/8 inch seam allowance to stitch a curve. Then understitch if possible. It produces a much cleaner, sharper curve instead of trimming to 1/4 inch and clipping. Try it!

After the armholes are finished, place the two right sides of the vest back together again lining up all the edges. Pin to hold the layers.

Stitch the front and neckline together.

Begin stitching about 2 inches from the side seam on the bottom of the front and stitch across the bottom of the front, up the center front and around the neck and down on the other side of the front stopping about 2 inches from the other side seam.

Use a regular stitch length to stitch across the bottom of the front and up the front. Change to a short stitch length to stitch the curve around the neck.

Sandwich press the seam.

Press the seam open.

Trim the curved area around the neck to 1/8 inch.

Trim the rest of the seam to 1/4 inch.

Hold the scissors at an angle when you trim to help layer or grade the seam allowances or use "duckbill" scissors to help do this.

Sewing Tip: Always stagger the edges of seam allowances when they end up laying on top of each other in a finished garment.

Turn the vest right side out by pulling the fronts through the shoulders one side at a time.

Press well setting the seam lines exactly on the edge.

With right sides together, match the armhole seams and pin exactly through the stitching line to hold one on top of the other.

Stitch the side seams of both layers in one continuous step carefully walking the needle over the underarm pin.

Sandwich press the seam.

Press the seam open.

You may want to leave the full seam allowance here in case you have to let the vest out sometime.

Now, you have the bottom of the back open and about 2 inches on either side of the side seam toward the front.

Turn right sides together matching up the side seams. Put a pin exactly in the line of stitching in the side seams to hold one on top of the other.

Starting at one front side where you stopped stitching previously, stitch across the bottom until you come to about 2 inches from the next side seam pin and stop leaving about a 4 inch opening on that side.

Sandwich press the seam.

Press the seam open.

Press under the unstitched seam allowances as though they were stitched.

Trim and grade the seam allowances to about 1/4 inch.

Turn the vest right side out through the 4 inch opening at the side lower edge. This opening is better than having the opening in the middle of the center back. It isn't as noticeable.

Press well again.

At the opening, turn in and line up the edges.

To finish this opening, slip stitch it closed by hand or place a narrow strip of fusible web and fuse it closed.

If desired, topstitch the vest 1/4 inch from the edges.

Make buttonholes on both sides of the vest.

Sew 2 buttons together making a thread shank in between them. Use these double buttons through both buttonholes like cuff links. You can even use 2 different buttons as
long as they are the same size to fit through the holes.

Method II

Another method to finish your reversible vest is to sew each vest with shoulder seams and side seams.

Place the vests with wrong sides together.

Stitch 3/4 inch all around the armholes and the outer edges of the vest holding the 2 layers together.

Trim off 5/8 inch all around.

Bind all the outside edges either with self fabric, contrasting fabric, or a fold over trim or braid to finish.You can even use a decorative serged edge to finish the vest.

This is fast and easy!

It's your choice. You are the designer!

Enjoy your vest!

It just makes sense!

2 Sewing Techniques On How To Sew A Reversible Vest

=-=-=-=-=-=-=-=-=-=-=-=

©2006 Marian Lewis - All Rights Reserved

1st Step To Sewing Success

Marian Lewis is a sewing instructor and the creator of an amazing new fitting method for hard-to-fit sewing folks. In her ebook, "Common Sense Fitting Method For Hard-To-Fit Sewing Folks Who Want Great Fitting Skirts And Pants", find out step-by-step WHAT you really need, WHERE you really need it and HOW to apply that to a commercial sewing pattern.

For more information, go to http://www.1ststeptosewingsuccess.com/fitting.html

Marian is also the author of other eBooks related to sewing including, "Sew A Tee Pee And Accessories For Your Tribe Of Kids" and "Classy Designer Straight Skirt" where she teaches basic and advanced sewing techniques.

To learn more, go to http://www.1ststeptosewingsuccess.com/sewing.html

To discover sewing and fitting secrets to achieve sewing success, follow the link http://www.1ststeptosewingsuccess.com

Relate Link Hot Deals Fire Proof Media Vault 500 Gb Capacity Ivory For 1 055 75 Hot Deals Mtd 918 0624A Spindle Assembly Cheap Swimming Pool Cover Blue Solid Safety Covers 18 X 36 10 Yr Sale Under The Sun Distribution

Sunday, April 15, 2012

Make Christmas Tree Napkins, Name Tags, And Ornaments Whether You Sew Or Not!

They Are Quick, Easy And Fun Gifts For Young And Old To Make For Family And Friends.

The trick is in the folding to make the napkin look like a Christmas Tree.

Serger

Let the kids cut some out of paper and decorate their own.

Make Christmas Tree Napkins, Name Tags, And Ornaments Whether You Sew Or Not!

Use them as name tags, decorations, Christmas Tree ornaments and napkins, of course.

Napkins can be either single or double layer of fabric. They can be any size you want them to be. The example I am using here is a 14-1/2"

Use some pretty Christmas prints or some unusual decorative fabrics.

One year, I used a lacey fabric and rolled the edges with a gold metallic thread. Then, I hung them on my tree. It really looked pretty.

You really don't have to sew these napkins if you don't want to. You can use decorative edge craft scissors to cut the fabric and not finish it with sewing at all.

You can even use paper napkins if you like. Have fun with this idea.

Less than a yard of 45" wide fabric makes 6 napkins single layer or 3 double layer.
1-5/8 yards makes a dozen single layer napkins.

Preshrink all fabrics.

I also like to spray starch my fabric before I cut and serge or satin stitch the edges of my napkins.

Cut Napkins into 14-1/2" circles.

To make a paper pattern, draw a circle 14-1/2" in diameter.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Here is how to make a compass to draw your pattern.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Tie a string or ribbon to a pencil.

Measure the string back from the pencil 7-1/4".

Put a pin in the string/ribbon at that point.
(7-1/4" is the radius or 1/2 of the diameter of the 14-1/2" circle.)

This is your compass to help you draw your circle.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Here is how to draw your pattern.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Place some tracing paper down and put the pin in the center.

Now, extending the string, and using the pencil, draw a circle out all around the pin 7-/4"away.
This creates a 14-1/2" circle for your napkin pattern.

Label it and keep it for future napkins.

=-=-=-=-=-=-=-=-=-=-=-=-=-=

Single Layer Napkins

=-=-=-=-=-=-=-=-=-=-=-=-=-=

Serge finish with the right side up on your serger.

I like to use the rolled edge finish on most of my napkins. It depends on the fabric.

Feed the circle of fabric to the knife slowly letting the knife shave off a little of the fabric.

Slightly overlap the beginning stitches about 2 inches.

Seal the end with "Fray Check". Let dry. Trim off the thread tails.

=-=-=-=-=-=-=-=-=-=-=-=-=-=

Double Layer Napkins

=-=-=-=-=-=-=-=-=-=-=-=-=-=

Place 2 circles wrong sides together.

Make sure one circle's straight grain matches the other circle's bias grain.

This will minimize flared edges.

You can also apply slight differential feed to eliminate flared edges.

Or you might want to baste the two layers together to help hold them while you finish the edges.
=-=-=-=-=-=-=-=-=-=-=-=-=-=

Serge Finish Edges With A Serger

=-=-=-=-=-=-=-=-=-=-=-=-=-=

A rolled edge works well on light to medium weight single layer napkins.

A rolled edge may not work on the double layer fabrics or heavier fabrics. Test it first.

Try using a narrow satin balanced stitch instead.

Note: If you get the "Pokies", try wrapping the napkin bias edges in Solvy (a water soluble stabilizer) and then serge. Wash the Solvy away when finished.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Conventional Machine Satin Stitch Finish

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

If you don't have a serger, you can use your conventional sewing machine.

Finish the edges with a satin stitch sewing in from the edge using a stabilizer such as water soluble Solvy.

You may want to spray starch the napkins again before stitching. It might help.

You can apply "Fray Check" to the outside of the stitching when you are finished to seal the edges.

Let it dry and then trim off any excess fabric.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Fold and press the napkin into a Christmas Tree Shape.

Here are the folding instructions.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

1. Fold the napkin in half and press well. We will call this fold the center fold.

2. Fold again into quarters and press lightly. This is a temporary crease that we will use as a guide to establish the fold we actually want.

3. Open back up to the 1/2 fold again and measure 1-1/4" above the temporary quarter foldline.

4. Fold the napkin "back" along the 1-1/4" new line (the one above the quarter fold) and press well. We will call this fold, Fold A.

5. Now you have a fold at the top, (Fold A) and the lower part of the center fold to your right.

6. The upper part of the center fold that you just turned down, we will call Fold B.

7. Take the top Fold A and bring it over to meet the center fold edge to your right and press in place.

8. Now bring the upper portion of the original center fold (Fold B) over on top of Fold A and to the lower portion of the center fold edge and press again.

Voila! There you have a Christmas Tree.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Decorate your trees

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Add a bow, jingle bell, decorative Christmas button or whatever at the top of the tree if desired.

Embroider each family member's name on his/her napkin.

Use decorative stitches, paint or decorate your tree napkins any way you like.

=-=-=-=-=-=-=-=-=-=-=-=-=

More Ideas For Smaller Trees

=-=-=-=-=-=-=-=-=-=-=-=-=

Consider making smaller circles into trees, add a ribbon loop at the top and use them to decorate packages or to hang on your Christmas Tree as ornaments.

Use up lots of that stash! It is easy!

Or, how about letting the kids cut some circles from paper napkins and have them decorate their trees with crayons, stickers like stars, glitter glue, etc.

They could give them to family members, classmates, teachers, etc., use them on packages, hang them on the big tree, or use them as place cards at the dining table.

Be creative. You are the designer. Have fun making your Christmas Tree napkins!

It just makes sense!

Happy Holidays!

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

© 2005 Marian Lewis - All Rights Reserved

1st Step To Sewing Success

Make Christmas Tree Napkins, Name Tags, And Ornaments Whether You Sew Or Not!

Marian Lewis is a sewing instructor and the creator of an amazing new fitting method for hard-to-fit sewing folks.

In her ebook, "Common Sense Fitting Method For Hard-To-Fit Sewing Folks Who Want Great Fitting Skirts And Pants", find out step-by-step WHAT you really need, WHERE you really need it and HOW to apply that to a commercial sewing pattern.

For more information, go to: => http://www.1ststeptosewingsuccess.com/fitting.html

Marian is also the author of other eBooks related to sewing including, "Sew A Tee Pee And Accessories For Your Tribe Of Kids" where she teaches basic sewing techniques while you have fun doing it!

To learn more, go to: => http://www.1ststeptosewingsuccess.com/sewing.html

To discover sewing and fitting secrets to achieve sewing success, follow the link: => http://www.1ststeptosewingsuccess.com

Relate Link Buy Cheap Saga Tt 10 Electric Guitar Kit For 149 99 Cheap New Att Synj 4 Line Cordless Corded Deskset Att Sb67148

Friday, April 13, 2012

Macrame Knot Instructions

In this tutorial you will receive instructions on the following macrame knots.

1. Directions on how to tie the basic half knot. With special techniques to make it quick and simple.

Lay-In Thread

2. Instructions on how to tie an easy square knot.

Macrame Knot Instructions

3. Directions for making a basic over hand knot.

4. Instructions for making the macrame flat pattern design.

5. Instructions for making the macrame spiral pattern design.

6. Advanced directions for making a Josephine Knot.

A short history of macrame. The modern art of decorative macrame knots is believed to have originated with Arabian weavers some time in the 13th century. Arabian weavers would knot the excess threads at the edge of hand-loomed fabrics into decorative knots.

Macrame is a very versatile craft. It has been used in the making of many kinds of jewelry including necklace, bracelets and chokers. It is also used to make common every day items such as hammocks, plant hangers and curtains.

So let's make some macrame knots.

1. How to make a basic half knot.

A half knot is one of the most basic macrame knots there is. It forms the basis of some of the more advanced knots and patterns that are created with macrame. To make a half knot you need three elements. A center cord that stays stationary and two outer knotting cords.

Tip - Half knot tying is much easier if the center string is taught and secure.

Now to make our half knot take one of the knotting cords go over the center string and under the opposite knotting cord. Next take the second knotting cord and go under the center string and over the first knotting cord. Now pull tight. You have finished a macrame half knot.

Now that is a technical description of how a half knot is tied but how does a professional do it? When you are doing it professionally the key is speed.

Step 1. Take the right hand knotting cord in your right hand lay it across the center string. This creates a loop on the right hand side.

Step 2. Take the left hand knotting cord in your left hand and lay it across the right hand cord.

Step 3. After laying the left hand knotting cord over the right hand knotting cord bend it under. As you are bending it under push your right hand index finger and thumb through the right hand loop grab the left hand knotting cord with your index finger and thumb and pull it through the loop.

Step 4. Pull tight. If your center string is tight as I suggested earlier you can pull the knot tight quick and it will be snug and secure. If your center string is not tight then you will need to work the knot into place. Done right each knot should only take a couple seconds to tie.

2. Square knot making.

Now that you know how to tie a half knot you are ready to make a square knot. Since a square knot is simply two half knots tied opposite to each other. So first we will make a half knot as we did before. However for the second half of the square knot we will start with the second knotting cord instead of the first knotting cord. So take the second knotting cord and go over the center string and under the opposite knotting cord. Next take the first knotting cord and go under the center string and over the second knotting cord. Pull tight. You have just finished a square knot.

3. Directions for tying an over hand knot.

An over hand knot is a very basic simple macrame knot. To make an over hand knot take a single string. Start by making a loop over your string. Bring the end of the string under the cord and through the loop. Pull tight and you are finished.

4. Instructions for making a macrame flat pattern design. In macrame the flat pattern design is created when a series of consecutive square knots are tied together.

5. Instructions for making a macrame spiral pattern design. The macrame spiral pattern design is created when a series of half knots are tied in a row. To see the spiral develop it's recommended to tie at least four or more half knots.

6. Instructions for making a Josephine knot.

The Josephine knot is a rather complex advanced macrame knot.

Step 1. Take cord A and form it into a loop that you will set on top of cord B.

Step 2. Take cord B and bring it up and over the first end of cord A.

Step 3. Continue to move cord B up and bring it under the second end of cord A.

Step 4. Now bring cord B down and over cord A.

Step 5. Continue moving cord B down passing under cord B that's right it will pass under it's self.

Step 6. Next bring cord B over the outside of cord A.

Step 7. Pull evenly on all four cords to finish your Josephine Knot.

This concludes my macrame knot tying tutorial.

Macrame Knot Instructions

If you would like more macrame hemp jewelry tutorials please visit my website. Hemp Necklace Store

Some of my most popular hemp jewelry tutorials include. How to make a hemp necklace and How to Make a Hemp Bracelet

Relate Link Best Offer Panasonic Ne 1064F 1000 Watt Stainless Steel Commercial Microwave For 472 22 Cheap Ricca Chemical Company 8270 5 Sulfuric Acid 0 25 N 20 L Best Price Free Shipping Buy Dual Self Supporting Light Pipe Lowest Price

Wednesday, April 11, 2012

Warning About Laminate Flooring on Stairs

Laminate is a great floor cover solution, not only for private homes but also for commercial buildings and offices. With the available variety of laminate grade ratings that can serve even the highest amount of foot traffic, it's no wonder that it's such a popular choice these days. Some problems may arise when there are steps and stairs that connect to laminated floor though. It's often desirable to maintain the continuity of the design by laminating the stairs so they blend nicely with the floor and the surroundings without creating sudden gaps that are visible to the eye.

Be warned though, laminating steps and especially larger staircases can be very dangerous. Laminate finishes are often quite slippery, especially those of low grade rating that are meant for more private use with less foot traffic stress. It is essential to consider who is going to walk on it and avoid putting any home members or potential guests under the threat of falling down. Elder people or little kids are often the ones who are most exposed to this danger.

Lay-In Thread

Of course a solution is to put a runner cover in the form of carpet or a rug over the steps, even though the reason for laminating the stairs might have been getting rid of using fabrics in the first place! But the thing is, most suppliers and manufacturers would never advise you to laminate your stairs and leave them uncovered. The risk is just not worth it and only someone who doesn't care would let people take such risks.

Warning About Laminate Flooring on Stairs

That said, there are a few ways to go around the slip and fall problem. One is to use a more abrasive laminate (higher grade) that has the same or similar finish as the floors leading to the staircase. Another is to install additional elements to the thread and riser of the stairs that would keep feet in place, but that leads to another potential hazard - tripping!

If, despite all, you go ahead with a laminate flooring on stairs in your home, bear in mind that most suppliers offer specially made staircase floor planks that fit to most standard steps and are specially made to combat with the problems that arise as best as possible.

If you attend to install laminate yourself, always glue the cover and never use nails, as the risk for having an unstable piece (which happens sooner or later) is not worth taking. Another thing to have in mind is that laminating stairs is always a specifically individual tasks. The requirements and factors differ from home to home, so while it's OK to follow some general tips and measurements, make sure to observe and plan carefully for your own specific case.

Warning About Laminate Flooring on Stairs

If you would like to learn more about floors in general, flooring types, floor installation and floor cover maintenance tips, visit http://AllAboutFloors.co.cc where you can read about flooring comparison, installing laminate floors guides and resources, cheap bamboo flooring, laminate hardwood floors, pre-finished hardwood floor, engineered bamboo flooring, and more.

Relate Link Special Price Tech Lighting 700Ttomn16Ss Lowvoltage Singlecircuit Ttrak Track For 180 00 Cheap Kahler 7330C Fixed Bridge System Best Price Free Shipping Cheap Proto 2000 Ho Scale Diesel Emd E7B Powered With Sound And Dcc 920 40970

Monday, April 9, 2012

How to Get Free Or Cheap Plastic Surgery

Plastic surgery is something that is starting to become fairly popular in North America, before it was just the celebrities and famous people who got plastic surgery. Now however, many more common people are starting to put beauty makeovers into their lives.

The problem with surgery though is that it is very expensive for someone to do. It will cost you thousands of dollars just to get a simple operation done on yourself. The most expensive part of the body to get an operation on is the face. It can cost up to 00 just to get a face lift.

Serger

This makes it very hard for most people to afford plastic surgery. Luckily however, there are a few things that you can do to get cheap or even free plastic surgery.

How to Get Free Or Cheap Plastic Surgery

The number one thing that you can try to do to get cheap plastic surgery is to change the location of where you are getting your operation done. By this I mean go to a different country. India is a very popular state for cheap medical treatments.

This is because the government likes to get people coming from other countries so it puts a low price on its medical treatments. This does not mean in any way that you will get a surgeon of a lesser quality.

The only problem with getting an operation done in India is that you are going to have to pay to get there. For some people this might be a bit of a problem but for others it isn't that big of a deal.

Your only other option really is took look around a prices until you find one that is good for you. This can take a long time but if you keep looking you are sure to find something that is right for you.

How to Get Free Or Cheap Plastic Surgery

Check out these two web pages for more tips on cheap plastic surgery and even free plastic surgery.

Relate Link Cheap Ricca Chemical Company 8270 5 Sulfuric Acid 0 25 N 20 L Best Price Free Shipping Special Price Tech Lighting 700Ttomn16Ss Lowvoltage Singlecircuit Ttrak Track For 180 00 Cheap Beck Arnley 104 1256 Transmission Mount Best Price Free Shipping

Sunday, April 8, 2012

10 Easy Things to Make With a Serger

The greatest thing about serging is that it is fast and easy. Here are 10 projects you can easily make in under an hour. All of these projects would make excellent gifts but they are so useful and fun to make you will want to make them for yourself, too.

1. Napkins- Save a tree and add elegance to any dinner table by serging up a stack of these, finished in a couple of minutes each by using the rolled hem.

Serger

2. Handkerchiefs- Made in the same way as napkins, but use soft flannel, or try re-purposing old t- shirts, pajama pants, or anything else soft you might have in your scrap basket.

10 Easy Things to Make With a Serger

3. Tablecloths- I made a festive party tablecloth by cutting a red sheet to fit my table and then sergering all four sides with rainbow variegated thread.

4. Baby Blankets- If you use 2 layers of flannel, these are so much nicer than what they sell in the stores. This is probably the simplest, easiest baby gift you can make, but each one you make will be well used and loved.

5. Pillowcases- With one yard of fabric and about 10 minutes you can have custom bedclothes far more fabulous than what you will ever find for sale in the shops.

6. Designer Children's Clothes- YOU are the designer. You could make a dress for a little girl from a vintage pillowcase in half an hour. I made a T-shirt for my son using the good pieces from a stained pocket tee that originally belonged to his dad. I used royal blue thread and set the seams on the outside, quickly fused an applique cut from patterned fabric, and added the original pocket at the hip. This has become baby's favorite shirt because of the pocket, and we have received many compliments on the creative, exposed seams. Sergering the seams on children's clothes makes them more long lasting and hard wearing.

7. Patchwork, with a difference- This is another creative designing opportunity. Try making simple patchwork with the serger, and have some of the seams on the front side of the work. Quilts and bags made in this way are stunning and original.

8. Purse accessories- After you make your patchwork purse, fill it with a glasses case, wallet, checkbook cover, and more. You could probably complete the whole set within an hour.

9. Cloth baby diapers and wipes- There are lots of ways to make cloth diapers, but the easiest way is to make "flatfolds" by sergering layers of flannel together in a rectangle, which you will fold into thirds in the same way as you would a "prefold." You can easily find out the standard sizes of prefold through Google, though making your own means you can custom fit diapers for your child. I love to use wooly nylon in my loopers when serging diapers.

10. Curtains- These are greatly simplified by the serger; you can do rolled hemming on three sides in under 5 minutes. You can even attach and gather a ruffle in one fast pass through your machine. Combine these with easy serger patchwork, and you can make something custom and truly special to match any decor.

10 Easy Things to Make With a Serger

Please visit my blog, sewing and growing, at http://www.sew-and-grow.blogspot.com Here you will find much more information on sergers, as well as projects, ideas, and tutorials to inspire you.

Relate Link Best Offer Panasonic Ne 1064F 1000 Watt Stainless Steel Commercial Microwave For 472 22 Cheap Citygear Miami Messenger Notebook Case Best Price

Friday, April 6, 2012

Summary of the Bible, Genesis to Revelation

This Summary of the Bible, Genesis to Revelation was written to give a "big picture" view of the story of the Bible. In order to put all of the stories that you have already heard into one comprehensible story. I do not intend to tell the individual stories, but to tell the major story line of God's chosen people. I will also include things not in the Bible itself that I think are interesting and also some memory tricks that I use.

"In the beginning God..." Then God created Adam and Eve. They had Cain, Able, and Seth. After a long period of time comes Enoch. After another long period of time, comes Noah. The story of the Tower of Babel is next. More than 1000 years later, comes Abraham.

Lay-In Thread

Abraham is promised to be the father of a great nation. So it is from Abraham that the story of God's chosen people began. Abraham had Isaac. Isaac had Jacob and Esau. Jacob's name was changed to Israel, which means "wrestles with God." Israel had 12 sons, which become the 12 tribes of Israel. The most famous son is Joseph. Joseph was sold into slavery, taken to Egypt, rose to number two, and brings the whole family of Israel (66 people) to Egypt to save them from the famine. Then Joseph dies and this concludes the book of Genesis.

Summary of the Bible, Genesis to Revelation

The book of Exodus opens some 400 years later. We find the family of Israel no longer in a prestigious status. They have been taken as slaves. Now this next part is not in the Bible. I read it from a Jewish author, but it does explain the story somewhat. We know that the family of Israel was brought to Egypt in order to be saved from the famine, but where did they come from? They were living in the land that was promised and given to Abraham. So the Jewish people felt that the reason they were taken as slaves in Egypt was a punishment from God because they failed to return to the Promised Land after the famine was over.

Back to the story. Up to this time God has dealt with individual people, Abraham, Isaac, Jacob, etc. But now we have for the first time (after a period of 400 years of silence), God revealing Himself to the masses in signs and wonders. Remember this, you will see it again. The signs and wonders are the plagues that God did to Egypt in order to get the Pharaoh to let His people go. Once released into the desert, God gives them laws, directions on how to build the tabernacle, how to do sacrifices, etc. Then they build all this stuff and we end the book of Exodus.

Leviticus has a bad reputation for being filled with laws. It deserves every bit of that reputation because that is exactly what it is.

Numbers has a bad reputation for being filled with census numbers. It does not deserve this reputation. There is a lot of plot development in Numbers. Numbers begins with a census that not only counts the men (estimates put the full number of people, including women and children, somewhere between 2 and 3 million) but organizes them into a cohesive group, capable of moving as one. Then they move from where God gave them the laws to the Jordan River and ready to enter the Promised Land in 11 days. They send out 12 spies. Ten of the spies come back too afraid to proceed. Two come back with confidence to proceed. The two are Joshua and Caleb. The penalty for not going into the Promised Land is to wander around in the desert for 40 years. They wandered for 40 years in a space that took them only 11 days to cross in the first place. They wandered until all persons over the age of 20 had died, with two exceptions, Joshua and Caleb. At the end of Numbers they have returned to the Jordan River and are ready to try it again.

Deuteronomy covers a period of 60 days. Thirty days Moses was giving speeches. He reminded the people what they have been through and encouraging them not to repeat the mistake that their fore fathers made. Moses dies and 30 days of mourning then Joshua takes the lead. This is the last of the five books of Moses, also called the Torah, the Law, or the Pentateuch. The rest of the Old Testament was mostly written by the Prophets. So when you see, in the New Testament, references to the Law and the Prophets, you will know they are referring to the Old Testament.

Summary of the Bible, Gensis to Revelation

The book of Joshua is then the story of Joshua leading the people into the Promised Land and driving out those who lived there. Here is a little known fact. The purpose of God's chosen people was so that God could be revealed to other people through His chosen people. You can see this happen in stories like Rahab. She makes it clear that all were aware that God was with the Israelites and they were very afraid. Also, the Israelites were to convert other people from their pagan gods to following the Creator God. These converts were called Proselytes.

After they are settled in the Promised Land, they then need to be ruled over. This is done by a series of Judges. The first of the most memorable Judges is Deborah, because she is a woman in a male dominated society.

Then comes Gideon. Gideon is listed in the study Bible as a Judge for 40 years, but if you read the text you will find that he led a revolt against those oppressing Israel at that time. When the wars were over they offer Gideon a Judgeship and he turns it down. So how do we resolve this obvious contradiction? The answer lies in the translation of the word Judge. It more appropriately should be translated "leader". So a Judge could have been a mayor, governor, general, etc. So after Gideon had finished being a general, they offered him the position of Governor and he turned that down.

The last famous Judge (in the book of Judges) was Samson.

Next comes the story of Ruth, who was alive during the time of the Judges.

Next come the stories in 1& 2 Samuel. Samuel is the last good Judge. One interesting thing about Samuel is that he dies in 1 Samuel 25. So why would they name 2 Samuel after Samuel? Well, the full text of Samuel was found on one scroll. So the whole document was referred to as Samuel. Because it was so big they decided to split it in half. Just as a memory trick, if it hadn't been found on one scroll they would probably have named them the book of Samuel and the book of David.

The Israelites came to Samuel and pleaded for a king. So Samuel asked God for a king and God said that He wanted to be their King. But they continued to press Samuel for a king, so God finally says OK, I will give you a king, but you are not going to like it. So He told Samuel to anoint Saul of the tribe of Benjamin (you will hear this again later too) as king. Saul didn't work out so good so God told Samuel to go anoint a son of Jesse. This turned out to be David. After Saul died in battle, David was made king. On his deathbed David handed the Kingdom over to Solomon, his son. When Solomon died the Kingdom of Israel was splint into a divided Kingdom. The Northern Kingdom was called Israel and the Southern Kingdom was Judah. So there were only three Kings that ever ruled over a united Israel.

More memory tricks. This is not exact but is useful for remembering where people are in which book. Mentally split 1 Samuel, 1 & 2 Kings, and 1 & 2 Chronicles into halves. In the first half of 1 Samuel the major character is Samuel. In the second half the major character is Saul. 2 Samuel is all about the reign of King David. In the first half of 1 Kings the major character is Solomon. In the second half of 1 Kings the major character is Elijah. In the first half of 2 Kings the major character is Elisha. In the second half of 2 Kings there is a list of kings both in the north and in the south, but no major character.

The end of 2 Kings has a lot of plot development. The Northern Kingdom of Israel was sacked and dispersed to other nations and intermarried with other races. They became known as the half-breeds or the Samaritans of Jesus' day. That is why they were so despised by the Jews. The Southern Kingdom of Judah was sacked by Babylon and taken captive for 70 years. Then King Cyrus became king and allowed them to return to Jerusalem and Judah. An event that was prophesied by Isaiah (including the name Cyrus) about 150 years before it happened. You will find it in Isaiah 44:24-28. Thus ends 2 Kings.

Now we enter into 1 & 2 Chronicles. 1 & 2 Chronicles is a snapshot of everything we have talked about to this point. Back to the memory trick. The first half of 1 Chronicles is genealogy. Hidden in this genealogy is the Prayer of Jabez (Chapter 4). The genealogy ends with Saul. And then the second half of 1 Chronicles is about the reign of King David. So the first half of 2 Chronicles is about the reign of King Solomon. The second half of 2 Chronicles is about the divided Kingdoms and ends with King Cyrus releasing Judah.

Interesting to note is that after Solomon both the Northern and the Southern Kingdoms had 19 kings before being sacked. The Northern Kingdom almost exclusively had one King rise up and over throw the reigning king; killing the king and his family. The southern kingship almost exclusively was passed down from father to son.

Next comes Ezra. Ezra was a high priest who reinstituted the procedures used in Temple worship.

Next Nehemiah was more like a governor who rebuilt the walls around Jerusalem in order to protect the people and the newly rebuilt temple.

This ends the chronological story of the chosen people of God. The rest of the books in the Old Testament are located somewhere in this story.

Summary of the Bible, Gensis to Revelation

Esther lived during the Babylonian exile.

Job is probably a contemporary of Abraham or a grandson of Israel.

Psalms is a collection of songs written mostly by David.

Proverbs is a collection of wise sayings mostly by Solomon.

Ecclessiastes and Song of Solomon were more writings by Solomon.

Now we come to the prophets. There are 16 prophets; four Major Prophets and twelve Minor Prophets. The Major Prophets are Isaiah, Jeremiah, Ezekiel, and Daniel. They are called Major Prophets merely for the amount of material they wrote.

The Major Prophets are split in half by a book called Lamentations. This book is composed of 5 poems that were recited by the people during the Babylonian Exile. Basically, they say, "We have sinned against God, please forgive us and restore us to the Promised Land." These poems follow the book of Jeremiah, which will help you remember that Jeremiah wrote Lamentations.

Jeremiah, Ezekiel, and Daniel all prophesied during the Babylonian Exile. Daniel had 3 friends named Shadrach, Meshach and Abednego, so the book of Daniel is where you find their story.

These Minor Prophets were all before the Babylonian Exile: Hosea, Joel, Amos, Obadiah, Jonah, Micah, Nahum, Habakkuk and Zephaniah. The last 3 Minor Prophets (Haggai, Zechariah, and Malachi) were the only ones that prophesied after they had returned from the Babylonian Exile.

This ends the Old Testament.

Summary of the Bible, Gensis to Revelation

Now comes 400 years of silence followed by God revealing Himself to the masses through signs and wonders (sound familiar); which are the miracles of Jesus Christ. There are many things in this book that give one the impression that this book (which was written by over 40 authors over a period of 1500+ years) was written by one Person; which it was. It was written by the Holy Spirit. This is one of my favorites. Consider this. Did 12 individuals (who would not normally associate with each other) come together and recognize that it had been 400 years since Malachi? Therefore the timing would be perfect for them to write about a messiah that would reveal Himself through signs and wonders. Also, they would have this fictional messiah fulfill all the O.T. prophecies in a way that absolutely nobody was expecting. Finally, all of them would go to their death professing this truth, without one of them recanting. This seems extremely unlikely to me.

The New Testament opens with 4 Gospels (Mathew, Mark, Luke, and John). They tell the story of the life of Jesus Christ. Jesus corrected the definition of "God's chosen people" from the descendents of Abraham to anyone who has a love for God and a love for other people, all other people. A careful read of the Old Testament will show that this was the true message of the Old Testament. Still the purpose of God's people remains the same, to Glorify God and to encourage others to follow the Creator God, now made known to us through Jesus Christ.

Then Acts tells the story of how the Gospel spread from Jerusalem to Judea and Samaria and to all the earth. It is in Acts that we get the story of Saul from the tribe of Benjamin (sound familiar, I don't know that it means anything, but interesting). It is chapter 9 where Saul has his conversion experience. An interesting note is Saul's name change to Paul. It is not the same kind of change like Abram to Abraham or Jacob to Israel. Those names were actually changes from one to the other. Saul to Paul was more of a cultural name change. Like someone named Jacque coming to live in the states and now going by the name James. It is the same name in two different cultures. It is not like Saul has a Jesus experience and Jesus changes his name, like what happened to Abram and Jacob.

Summary of the Bible, Gensis to Revelation

After Acts we have 13 letters written by Paul. It is from these letters that we get most of our doctrine. These letters are arranged in order of size: Romans, 1 and 2 Corinthians, Galatians, Ephesians, Philippians, Colossians, 1 and 2 Thessalonians, 1 and 2 Timothy, Titus and Philemon. Hebrews is next. We don't know who wrote Hebrews, which made the canonizing process interesting because Hebrews did not have the backing of an apostle.

James was written by the half brother of Jesus. Jesus' brother was very active in leading the church in Jerusalem. James the apostle had already been martyred by this time. He was the first disciple to be martyred, but Stephen was the first martyr.

1 and 2 Peter were written by Peter.

1, 2, and 3 John were written most likely by the Apostle John. When reading the Gospel of John you see the word "believe" repeated several times. In 1 John the dominant word is "know".

Jude was written by the brother of James, half brother of Jesus.

Revelation was written by the Apostle John and is the prophecy describing the return of Jesus Christ and the setting up of His eternal kingdom.

Summary of the Bible, Gensis to Revelation

The Thread

That is the story of God's chosen people. Throughout this story there is a thread that runs continuously, which gives us the feeling that this is all one book. One book written by One hand. That thread is the Messiah. I will give but a few examples.

I will pick up the thread at Genesis 3:15. God gives us the first promise of a Messiah that will suffer (be struck on the heal) but will deliver a deathblow (crush his head) to satan. We are painted a beautiful and unforgettable picture of the substitutionary nature of the Messiah in the story of Abraham laying Isaac on the altar as a sacrifice. Jacob refers to the Messiah as the Redeeming Angel when he gives the blessing to Joseph's sons. The Israelites are instructed to construct an Ark of the Covenant. The law was kept inside it and the lid on the Ark was called "the Mercy Seat." During the ceremony the High Priest would sprinkle blood from the perfect lamb onto the Mercy Seat. Such beautiful imagery is already given that through the blood of the Perfect One comes mercy that will cover the law. Moses refers to Him as "a prophet like me." David refers to Him as "my Redeemer." Job calls Him, "my Vindicator." Isaiah has 4 sections in his book called Servant Songs, where he talks about a suffering Messiah. Half of the book of Daniel is end time prophecies of the conquering Messiah setting up His eternal kingdom here on earth.

The Gospels of New Testament tells the story of the suffering Messiah in the flesh. Which is followed by how His story was spread throughout the world. The letters give us the "truths that we are to know" about the Messiah. The word doctrine means "teachings." Then the Revelation tells us of the return of the same Messiah, this time as a Conqueror that will set up His eternal kingdom here on earth. The whole Bible then is about our Messiah, who is Jesus Christ.

Summary of the Bible, Gensis to Revelation

Critical Question

If Jesus is the fulfillment of this Messiah, why is it that the Jews don't recognize Him? Near as I can tell the only reason they reject Jesus is because He did not set up His eternal kingdom. I learned something interesting when I audited a New Testament course at Campbellsville University. They said that before Jesus arrived on the scene, some of the Jewish Priests were beginning to teach that they were to look for two Messiahs. Their understanding of the scriptures was such that there must be a suffering Messiah and a conquering Messiah and they could not resolve the two into one Messiah. They were just too different. They did not understand the purpose of the suffering Messiah and would therefore look only for the conquering Messiah, the One that would set up His eternal kingdom here on earth.

How close they were to getting it. The New Testament then is the story of one Messiah and two comings. I heard one Jewish Priest put it this way. When the Messiah comes and sets up His eternal kingdom here on earth, we will ask Him, "Have you been here before?" Then we will know what to believe.

Summary of the Bible, Genesis to Revelation

For more like this please visit http://mcministries-uninc.blogspot.com/

I hope you have enjoyed this quick Summary of the Bible, Gensis to Revelation.

Relate Link Buy Cheap Battalion 2Zew5 Hardware Screws Not Included Hinge Continuous Plain Unfinish 96X3 1 2 Cheap Half Gross Of Csi 28 Inch Standard Practice Cedar Wood Archery Arrows In Assorted Colors For 2

Wednesday, April 4, 2012

Parasites-How Do You Know if You Have Worms and What to Do About Them

I had a client a while back who had this question for me: "I've noticed that I've been getting menstrual cramps the last few months and I don't usually have them. Can you tell me what you think it is?"

It was determined, strangely or not so strangely enough, that the cause of those menstrual cramps was parasites! And this isn't the only disease caused, in part, by parasites. Read on...

Lay-In Thread

I recommend for her, and for you, that you worm both your pets and yourselves about twice a year.

Parasites-How Do You Know if You Have Worms and What to Do About Them

I've tried natural wormers over the years--actually LOTS of natural wormers such as: garlic, cloves, black walnut, cilantro, wormwood, pumpkin seeds, pomegranate, diatomaceous earth, Rascal, Zymex, Vermifuge, several other natural wormer formulas and homeopathics, but nothing seems that effective. I've even tried the Hulda Clarke "Zapper" (which does not work by the way, because the voltage of the thing is not strong enough to penetrate the fecal material within the bowels--save your money by not purchasing or building one!) I am sorry to report (as a naturopath) that studies show these herbal treatments are only about 20% effective. The Certified Organic organization says when all else fails, use ivermectin (which is not organic in any way), but have you seen the list of side affects to that particular product? Three pages long!

I will say that when a client comes to me, I ask them if they have any cravings. One sure sign they are "wormy" is when they tell me they crave cloves. Clove oil has been shown to penetrate the egg and kill it where the other herbs only kill the adults. Herbs that kill parasites are often found in herbal cancer formulas because parasites are often a core cause of that particular disease.

One reason why I push so much for routine worming is that the medical field often misses this diagnosis--especially if you don't have a history of traveling outside the United States where parasites are often a big issue. I love working in my garden and often I am an open-mouth breather when I'm working up the soil. We also live in a windy area and dirt from the wheat and grass fields is often in the air. I try to wash my hands frequently, but anyone who works in the dirt knows that it's nearly impossible to keep from getting it on you.

Another reason why I stay on top of the worm situation is that worms carry viruses into our body. Some of these viruses can cause cancer, Parkinson's, multiple sclerosis, and a host of other horrid diseases.

In my opinion, the safest, cheapest, easiest, most effective way to worm yourself and your pets of the most common worms (roundworms--also called strongyles, thread worms, pinworms, ascarids) is to go to the local feed store and get a bottle of horse or dog roundwormer--Equi-Phar, ProTal, Strongid-T, and Nemex are all trade names of Pyrantel Pamoate. I say this because when you ask your doctor for a wormer, they usually tell you there is no need for you to be wormed. Make sure it says Pyrantel Pamoate on the label and nothing else added. Combination wormers are not always needed and not always safe.

Dosage: Use the dose of 5-10 mg/kilogram bodyweight (about 1 ml/5 to 10 pounds of a 50mg/ml solution) of bodyweight for dogs and humans and 1 ½ ml/5 to 10 pounds for cats. One teaspoon is 5 ml or cc (ml and cc are the same unit of volume). If you are not good at math, you'll want to double-check that you are taking the correct dosage. Although this wormer is so safe that you can take 40 times the amount with no harmful side effects, you don't want to under dose. And, "If a little is good, a LOT is not necessary better." The most common side effect is nausea so take this product with something on your stomach like a small meal or a few crackers.

One dose is all it takes, but you may have to give a second dose 7-10 days after the first dose for the initial worming or if the wormload is quite large. I use this once a year now for myself as I have had a history of heart palpitations (another symptom associated with parasites.) The worms will be dead within 20 minutes. You won't feel anything and should have no side-effects. You won't see anything pass into the toilet as a general rule but if you are wondering about what is passing, a photo often helps. Often people will mistake intestinal shreds for flatworms or tapeworms and undigested food for parasites. This wormer will not kill those types of parasties. Occasionally I see a pet get nauseated with an overdose, but in 30 years, I have never seen any other side-effect.

Will store-bought wormer work the same? No. Many stores still carry Piperazine wormer which has been so overused that it is no longer an effective wormer. Piperazine is often marketed as a "monthly" wormer in the pet sections. I once saw a litter of eight puppies in full seizure who had just been wormed that week with piperazine. Imagine eight cute little Golden Retreiver puppies laying on their sides shaking. It was horrifying! I immediately wormed them with Pyrantel and the worms just flowed out their little rectums and the seizures stopped within 20 minutes. It was incredible to watch!

If the product you purchase contains a tapeworm medicine (like clorpyriphos which is an organophosphate wormer), that may cause some serious side affects. Never use these store bought wormers on pregnant animals. The animal's guts can contract so strongly to pass the worms that they can rupture their uterus and die. Always get tapeworm medicine from your doctor or veterinarian as we carry much safer brands than the grocery or feed stores do. Tobacco plug is also not safe. Don't use it.

How do you get worms? We pick up worms from some of the things we eat, from the dirt, and from the dust we breathe in. Eating dirt is a sign of iron deficiency. We should talk if you are doing that... I got pin worms when I was a little girl by eating a mud pie (my friend said she'd give me a nickel if I did it!) Pinworms are the equivalent of cat and dog roundworms, only they are a different species of worm so are not passed from us to them and vice-versa. See more on that below.

Most adults (pets and people) have enough enzymes in their mouths to break down most of the eggs coming in through our mouths and nose, our stomach acids break down even more, but some eggs get by both of those back-up systems where they hatch, find a home, and grow into adults within about 10-14 days in our small intestine. After 14 days, these adult parasites are producing more eggs--millions of them in their lifetime. Yuk!

We see worms most commonly in baby animals and humans because their salivary enzymes are not as strong, the hydrochloric stomach acids have not been totally developed yet, and because they have oral fixations and put lots of things into their mouths--they ingest more dirt than adults. Their immune systems cannot keep up with that. The "load" (number of worms) gets so great in the small intestine that it spills over into the large intestine and into the stomach. This is why it is so common to see babies either vomit worms or poop them out. Because adults have a better immune system, the load is controlled and the worms like the environment of the small intestine, so that is where they stay. We may still have worms, but it is not as evident as it was when we were young children (or pets under a year of age.)

How do you know if you should take a wormer?

Signs of roundworms include, fevers, cough, wheezing, stomach problems, diarrhea, constipation, abdominal cramping, appendicitis, gas, bloating, increased cramping (menstrual), heart palpitations, pain in the lower right quadrant that comes and goes (spasms in the ileocecal valve), itchy anus', dry lusterless hair with split ends, seizures, pica appetite (often for sugar), clear mucous strands in the stool (yes you should be looking at it each time you go! And yes, I will ask you what it looks like if you ever consult with me.) People and animals with lots of parasites also have big bellies and lots of diameter below the belly button caused from the intestines losing their tone. Most times worms can be diagnosed by looking at the bowel contents under a microscope or doing a blood test, but not always. Protozooal parasites such as giardia are often missed.

Can I get roundworms and tapeworms from my pets?

Good question, and I get that a lot. If you worm your pets regularly, you won't have this problem. Dog and cat worms are different than most human worms. There are only a few species of worms that are zoonotic (passed from your dogs and cats to you)--one of those is Toxoplasma cati, which is passed to the human from cat feces and causes blindness in children. But, the Pyrantel Pamoate kills that and if you clean the litter box every day, the probability of that being passed is nearly nil. Giardia lamblia, an intestinal protozoal parasite can be passed to you through your pet as well, but mostly humans get Giardia from drinking contaminated water or eating contaminated lettuce or water chestnuts. Mange is NOT passed from animals to humans and neither are head lice or public lice. Tapeworms are not transferred from dogs and cats to people (but they are from fish and some farm animals). Tapeworms are treated with different drugs than roundworms.

Ring worm is not actually a parasitic worm. It is really a fungus and that, too, can be passed from your pets to you. We have fantastic homeopathic drops for that, but keeping the area scrubbed and applying iodine to it can help. Also keeping your immune system and that of your pet healthy with good high-quality foods helps immensely.

Well, that's worms in a nutshell (or in this case, an intestine!) Appetizing, eh?

Parasites-How Do You Know if You Have Worms and What to Do About Them

Dr. Denice Moffat is a practicing naturopath, medical intuitive, and veterinarian working on the family unit (which includes humans and animals) through her telephone consultation practice established in 1995. She has a content-rich website at http://www.NaturalHealthTechniques.com. Sign up for her free internationally distributed newsletter to receive a bonus report containing over 150 tips to improve your health starting today or follow her on Facebook for all the latest health updates and discussions at http://www.facebook.com/NaturalHealthTechniques.

Relate Link Best Offer 50 Blank White Skateboard Wheels 51 Mm Discount Ergo Baby Bc4Tol Organic Twill Cranberry Baby Carrier With Nautilus Print Lining And Led Sa Hot Deals Fire Proof Media Vault 500 Gb Capacity Ivory For 1 055 75

Tuesday, April 3, 2012

Proper Land Drainage is Important!

Many property owners are not concerned with yard drainage until they have a problem. Water naturally follows the path of least resistance to lower elevations and problems arise when original pathways constructed by the builder become blocked or were inadequate from the beginning. Not having suitable slopes and drains on a property to direct or divert water runoff can allow the water to find a path directly to areas where you would least want it such as foundations, under pavement, in your basement etc. Flooding basements and cracked foundations are good wake-up calls to the issue but addressing problems beforehand can save you thousands of dollars, and headaches, down the road.

The two categories of water supplying a lawn are surface and subsurface. Subsurface water refers to the water below the first layer of topsoil which cannot permeate any lower due to the tightness of the soil beneath. Also known as the water table, all soil has this layer of water with differences in depth depending on the area. Although a high water table can be a problem in some areas, in general, surface water is the cause of excess subsurface water as too much surface water penetrating the ground can raise the water table. Surface water sources are rainfall and irrigation, such as sprinklers, and can be particularly troublesome in urbanized areas which contain numerous impervious surfaces.

Lay-In Thread

Streets, driveways and parking lots simply leave nowhere for rainwater to go. As with a lawn, the runoff will either pool in depressions or flow to soil around the edges causing saturation in another area. When soil reaches 100% saturation, with little or no drainage to assist in excess water removal, not only do pools of water collect, but the saturated soil takes much longer to dry out. This excess water retards plant growth by decreasing aeration in the root zone and decreasing nutrient supplies. Additionally, excess water in the soil will increase freezing damage in the winter months. Having proper drainage on your property will prevent water from collecting around your building or home foundations, minimize soil erosion and help protect your vegetation from death and disease.

Proper Land Drainage is Important!

Surface and subsurface are the two types of drainage solutions and both are vital protections for buildings and lawns. Surface drainage refers to the natural pathway taken by the water following rain or irrigation and is achieved through gutters, downspouts, surface grates, exposed French drains and by shaping and grading your lawn to provide maximum surface water removal with minimum soil erosion. Subsurface drainage refers to pipes and drains placed in the lawn which remove excess water that has gravitated underground, either through holes in the soil or simply from soil saturation. Water travels through soil by capillary action, which is much like a paper towel - when one side gets wet, moisture will slowly travel to the dry side until the entire substance is saturated. Once the soil is saturated, subsurface French drains are needed to remove excess water. In doing so, subsurface drainage keeps plants healthy, helps soil to warm earlier in the spring and leaves less water to freeze in the winter, minimizing frost heaving damage to your home or building.

Problems associated with improper drainage

Improper drainage can lead to pools of collected water in your lawn and/or around your home or building, both of which pose a threat. When collected close to your foundation, standing water can potentially cause foundation cracks, foundation movement and flooded basements. When collected on your yard, pooling water gives mosquitoes a breeding ground and can leave your grass susceptible to disease.

Foundations: The most costly issue associated with improper drainage is your foundation. Soil naturally expands when it is wet and contracts when it is dry and as long as all the soil underneath your building expands and contracts uniformly, it is not likely to cause a problem. Damage is done, however, when only part of the soil heaves or settles. This differential movement is most often due to differences in soil moisture. Improper drainage on one side of the building can leave wet soil that remains waterlogged for days or weeks (or in worst cases leaves constant water pooled around your foundation walls) while the other side of the structure has soil that dries quickly following a rain.

The wet side has expanded, and remains so, while the other side contracts as it dries, and this action pulls the walls of the structure away from one another. Repetition of this process will eventually produce cracks in the foundations, walls and/or ceilings. Foundation repairs are not usually covered by homeowner's insurance policies and can cost as much as ,000 to ,000 or more to fix, not including cosmetic fixes to drywall, door jams, bricks, flooded carpets, flooring, etc. Anyone who has experienced a flooded basement or cracks due to heaving can attest to a costly fix! In addition, the drainage issues which caused the problem will still need to be addressed.

Basements: The same issue associated with foundations applies to your basement, with the added problem of letting water into your home through the cracks. In addition to damaging carpets, flooring, drywall and furniture, the water increases your basement's humidity creating the perfect environment for the growth of bacteria and mold. Mold enters your home as tiny spores, which need moisture to grow and multiply. They can grow on almost any surface and they digest and destroy your home as they do. When disturbed, mold spores are released into the air and can be breathed in by you and your family, aggravating allergies and asthma. A small number of molds produce mycotoxins which can induce nausea, fatigue, headaches and lung and eye irritation when a person is exposed to high levels. Furthermore, mites and spiders can proliferate in a moldy basement as mites feed on mold spores and spiders feed on mites.

Waterproofing your basement can help protect your home and is a good insurance policy, but your first line of defense against a wet basement is improving the drainage in the lawn and all areas surrounding the home or building. According to most engineers and home inspectors, 85 to 95% of wet basements and interiors of buildings can be made dry by improving exterior drainage around your house or building.

Mosquitoes: We are all familiar with one of the biggest nuisances of the summer but were you aware that mosquitoes need less than an ounce of water in which to lay their eggs? While standing water is generally the egg-laying site for mosquitoes, some species lay their eggs on damp soil and, if your lawn has poor drainage, leaves your grass as a perfect home for these pests. Needing only two to three days to hatch, your property needs to be able to dry out quickly enough either to prevent females from seeing your yard as a prime location or to dry out eggs that have been laid.

With females laying up to 300 eggs at a time, your yard can easily become infested, driving you and your family inside on warm summer nights. Along with the itching and aggravation of bites, mosquitoes bring diseases such as West Nile Virus, Malaria, Dengue and encephalitis. All are potentially fatal. Your pets are also at risk, as mosquitoes are the hosts for heartworm and can communicate this disease to dogs, cats and other animals. Additionally, West Nile and encephalitis can be transmitted to horses. The American Mosquito Control Association instructs property owners to not only eliminate standing water around your home or building, but to ensure proper drainage on your property to eliminate this potential hazard.

Turf Diseases: As the first impression a visitor or customer has of your home or business, it is no doubt important to you to have well-maintained and inviting landscaping around your property. Death and disease of grass and plants is not only ugly, it is a waste of money invested as well as expensive to correct. Excess water on or in your lawn prohibits the growth of grass, plants and trees by robbing them of their air and nutrient supply and leaving them susceptible to attack by fungi, moss and mold. Fungi, the most common cause of lawn diseases, are microscopic organisms that spread by air- or water-borne spores. The spores act like seeds, sprouting to life and infecting its environment when conditions are right.

Rhizoctonia Yellow Patch, Red Thread, and Pythium Blight are some common fungi diseases which appear in moist environments resulting from extreme soil and surface moisture. Many of the fungi diseases are difficult to control once they appear and damage may remain for two to four years following treatment. While fungicides can be applied to help prevent or control lawn diseases, several strains are resistant to fungicides. The best prevention is the absence of favorable conditions, including improving moisture conditions on top of, and under, your turf.

Mushrooms also need extreme wet conditions to grow. While mushrooms do not harm grass, many of them are poisonous and can be a danger to children and pets that ingest them. Poisonous mushrooms have no features to distinguish them from nonpoisonous mushrooms and identification, therefore, is only possible by those educated about the various genera and species.

Erosion: In addition to the issues associated with standing water, water moving too quickly off your property causes problems as well. As raindrops fall on your lawn, if there is sufficient intensity, the impact will dislodge small particles of soil which can then be carried off by the rain as it flows. This soil will either be carried off to sewers or deposited in another area of your yard, depending on your drainage conditions. Over time, original drainage measures, such as ditches and trenches, can become filled with soil, defeating their purpose and redirecting how water moves on your property. Erosion is accelerated where plant cover is sparse and spaces between plants become larger, leaving no protection for your soil during intense rains. Proper grades and slopes stop water from carrying away your soil by keeping water runoff at an acceptable rate. Slowing down water that is running off too quickly gives soil particles time to settle out of the water and back onto the ground before being transported too far away. Additionally, healthy plant life with deep roots protects and holds on to your soil.

Benefits of proper drainage

Structural Protection: Having a comprehensive drainage system in place protects your structure by preventing water's damaging contact with concrete. Water that doesn't evaporate and isn't absorbed by soil eventually goes somewhere and, oftentimes, it sits under and around your foundations. Drainage solutions will keep the moisture content around your foundation stable and uniform, keeping contraction and expansion to a minimum. This maintains the integrity of foundations and helps prevent cracks and water seepage.

Plants and Landscaping: Proper soil moisture is essential for plants and lawns to establish a healthy root system. Removal of excess water in the soil deepens the root zone and increases the air in that area. The increased aeration, in turn, increases the supply of nutrients, many of which need the air to convert chemically before they are accessible to plants. The deep root system which grows will then holds on to the soil and protect it from erosion. Additionally, water will not pool in areas of your property, leaving turf susceptible to disease, and help you maintain the pleasing aesthetics in which you invested.

Recreational Areas: By implementing drainage solutions, recreational areas, such as parks, golf courses and athletic fields, improve traffic ability and increased use of the property. Drains help nature clear out excess water and allow turf to quickly recover from rain. The result is that the recreational area can be open for extended periods of time and for more intensive use, resulting in increased revenue.

Spring showers are not the only cause for concern

The Midwest is notorious for extreme weather changes with a drought one year and floods the next. While St. Louis has an average rainfall around 40 inches, in 2008 we had 50.72 inches pour down on us, with nearly half of that amount coming between June and September. If you have weathered winter snow and spring rains, do not let down your guard thinking you are safe for another year. Summer can sometimes bring surprises and the added deluge to your soil will only intensify existing problems requiring more extensive repairs.

A note about water tables

Water table refers to the depth at which the soil always contains 100% water. In some areas the water table is higher than the bottom of the foundation, requiring a complex system of drains and sump pumps to draw the water away from your structure. High water tables can lead to devastating damage to your foundation or basement and is sometimes cited by professional waterproofers as the cause of a problem because of the expensive measures to correct it. The National Association of Home Builders, however, estimates that only five percent of wet basements are due to high water tables. If you have water damage, you are most likely dealing with surface runoff problems which can be corrected through slopes, grades and drains in your yard, along with proper gutter systems. Modern building codes prevent contractors from building basements where water tables are high and if your home or building is less than 30 years old you can be reasonably sure a high water table is not your problem. If you have a wet basement, be aware of this issue! Inform yourself by contacting your local building inspector and getting information about your local water table.

Do you have drainage problems?

Try this experiment: dig a hole one foot across and two feet deep and fill it completely with water during a dry spell. If the hole drains completely in less than five minutes or in more than 15 minutes, you have a problem. A more simple way to spot problems is to look at your lawn during and following a rain. If you have water flowing quickly across the yard removing topsoil during a rain or pools of water on driveways, parking lots or lawns following rain, then you have a problem. Other indicators include yellowing plants, yellowing or thin turf although it receives plenty of sunlight and has no obvious disease, fungus or mold on the lawn, stagnate water smell and water seeping through door sills, basements and garages.

Types of drainage solutions

A comprehensive drainage system will include surface and subsurface drain solutions. Surface drains remove the large amounts of water that fall in short periods of time and subsurface drains remove the excess water absorbed into the soil. The two systems work in conjunction to maintain the moisture in your soil at the proper level for protection of your landscaping and your home or building.

Gutters: Your first line of defense against foundation flooding is your gutters! During a moderate rainfall, the average sized roof sheds 160 gallons of water runoff per hour. To prevent the runoff from being deposited on the ground next to your foundation, a proper gutter system is essential. Not only is the correct gutter size for your roof area a consideration, but an insufficient number of downspouts is equivalent to having no gutter system at all. Downspouts are needed to handle the volume of runoff your roof will collect and splash blocks must be utilized to direct the runoff away from your home or building and out to your drain system. A better solution to splash blocks, however, is to install PVC piping to the end of the downspouts to remove the water 6-10 feet or more away from your home or building. Furthermore, gutters must be properly maintained to prevent clogs and gutter joints must be inspected for leaks. Having a suitable, effective gutter system should be the first step in your drainage solution.

Grades: To protect structures, the most important grades on your property are those within 10 feet of your foundation or basement. This will prevent the water you just diverted away from the structure from soaking back through the soil toward your structure. Suitable grades vary depending on who you consult but a safe measurement is a 1 inch (or more) drop for every 1 foot out for the first 10 feet. This results in at least a 10 inch slope for the 10 feet closest to your foundation walls. The rest of your yard should contain a continuous slope downward to keep the water moving away from your foundation.

Surface Drains: Surface drainage can be defined as the controlled removal of water that collects on the land from rainfall, irrigation, snowmelt or hillside seeps. As gravity is the primary force driving this type of system, it involves shaping the land with a continuous fall in the ground level to provide a downhill passage for surface runoff at an appropriate rate of flow. For grass drainage channels, or swales, a minimum slope of 1% to 5% is desired. The contours of the land then direct the runoff to a suitable collection site, such as ditches, basins or storm sewers. At the low point of the ditch or interception point, area drains are installed which are connected to a main or submain and prevents the water from pooling in your yard. The underground pipes need a minimum slope of 1% or 1/8 inch per foot to keep water moving through them. If the ditch is long, several smaller drains should be spaced in a series, rather than one large drain in the middle, to help prevent erosion.

For driveways and other hardscapes, channel drains and exposed French drains are ideal. These linear trenches collect sheets of water that run off, as concrete and asphalt absorb none of the water as it falls. The open area of the channel/ exposed French drain is much greater than an area drain and is better suited to the greater volume of rain it will need to collect. Additionally, channel drains allow designers to modestly slope hardscapes, rather than requiring numerous, extreme slopes to direct runoff to area drains.

Subsurface Drains: While the benefits of subsurface drainage are hard to see because they occur within the soil, the difference will be noticeable in your plants, grass and soil. Subsurface drainage is the removal of gravitational water from the soil, which is accomplished by placing French drains underground to collect and remove water to a drainage outlet. Subsurface drains do not remove water necessary for plants, only excess water, which flows to the drains by gravity. Sub-Surface French drains consist excavating a sizable trench and lining it with a filter or geotextile fabric, which helps prevent soil particles from entering the French drain. The trench is then filled with clean rock/gravel and a proper sized perforated PVC pipe for the application is placed in the gravel.

Once the trench is filled with grave, it will be covered with a layer a permeable filter fabric, installing a mixture of high quality topsoil/ sand and lastly installing new sod on top (assuming this French drain will be located in a grassy area). French drains function when water in the soil enters the gravel bed, flows into the perforated pipe and travels through connecting solid pipes to a discharge point. A general guideline for placing French drains is to use 4 - 6 inch perforated pipes, bury them 18 to 36 inches deep and space them 15 to 20 feet apart. In the trenches, pipes must maintain a .1% to a 1% slope. Soil construct, acreage and turf usage, however, may require variation from these guidelines and a professional can help you determine the best solution for your situation.

Discharge Outlets: Once water is collected in the pipes, it must be diverted to a suitable outlet to be released. This outlet can be a street gutter, a storm sewer or an onsite pond. Using a pop-up drainage emitter, water can be diverted to a water-safe area on your property away from your home or building. Pop-up drainage emitters are opened by the hydrostatic pressure of water flowing through the drain pipe, releasing water collected from gutters, downspouts, basins, grates, etc. If placed close to the street, the released water can flow over the curb and into the street without having to drill through the curb. The emitters then close as water flow diminishes, preventing debris and animals from entering the end of the pipe and clogging the system. Property owner or maintenance personnel need to make sure they perform routine maintenance on the pop-up emitters. This can be done by removing the pop-up to make sure there is no debris washed down from the roof gutters or surface drains that could potentially slow down the water flow in a heavy rainfall event.

Cleanout Connections: It is a good idea to install cleanout connections on all drainage systems integrated into your property. This is commonly overlooked until pipes need to be accessed by cameras or cleaning equipment years after the initial installation. Access points are needed for the following three reasons. 1) Routine maintenance, and especially if routine maintenance is neglected because the contractor will have to access the pipe to unclog them for a fee of course. 2) If the systems functionality has declined. 3) If damage has occurred to the drainage system pipes from heavy equipment or excavation during an on-site construction project. Although cleanouts add cost to your project, it is highly recommended to have cleanouts installed on all downspout connections, all French drain systems and all long mainline pipe runs over 80' without drain grates in which you can access.

Before contracting to have you project installed, make sure cleanouts are integrated into your drainage system. It has been calculated that the cost to cut into a pipe and then patch it because there are no cleanouts will be a minimum of twice the cost as having them installed in the first place. Sometimes it is 5-10 times as much when access is needed to an existing French drain without cleanout connections. So don't gamble because when you're installing a system with materials that last decades, you undoubtedly will need access; if for nothing else, routine maintenance. A professional drainage contractor should be able to help you determine the best cleanout points for the system their proposing for your property.

 Finding & Hiring a qualified drainage contractor

Doing your homework on potential drainage installers is important. You need to be assured that your contractor is insured and has the skills needed to properly install your systems. Be wary of "special deals" or the "great deal from a friend of a friend" - these will most likely cost you more dollars and headaches in the long run.

Tools for Locating a Potential Drainage Contractor: The Better Business Bureau is a great starting point in your search for a contractor. They maintain an online directory for BBB-accredited businesses in your area. You can check not only how long a contractor has been in business, but also any complaints filed about their operation. Angie's List is another great tool for recommendations, as you can get testimonials from actual customers. Even if you "hear of a guy from a friend," check their references online. See what other people's experiences have been and choose a pool of potential contractors from the best you can find.

Portfolio and References: After you have a list of potential people for the job, ask to see a portfolio of their previous jobs and whether you can see former worksites. If possible, see their handiwork in person, perhaps driving by a home or business during or after a rain. This will help you not only to understand their drainage plans for your property, but to assure you they can indeed get the job done right. If you can speak with former customers, ask if they were satisfied with the work, whether the contractor stayed within budget and if the project was completed in a timely manner. You need to look for the best person for the job, not the lowest bid. You want the problem to be fixed upon project completion; you do not want to be dealing with drainage problems or, in worst case scenarios, legal problems, long after the contractor has left.

Bids: Get at least two bids for your specific job and get them in writing. Furthermore, make sure you understand the difference between the bids. Higher bids do not always mean a contractor is trying to get more money into his pocket. Better materials, more skilled workmanship and better reliability may be worth a slightly higher price. Keep in mind that, usually, you "get what you pay for."

Insurance: An important issue when hiring a contractor is his insurance. If your contractor does not carry general liability insurance or worker's compensation, the property owner can held responsible for any accidents which occur while work is being done. To protect yourself, ask for proof of insurance. Reputable contractors will understand that you are doing your research and will not be offended. Be wary of any that try to convince you this is unnecessary - they may have something to hide.

Skills Needed: Make sure potential contractors have the skills needed to do your job. Is your contractor a drainage specialist or merely a landscaper who has dabbled in drainage installation? Can he utilize a transit to analyze your slopes if needed? Does he know the proper depths and spacing for pipe placement in your yard? Most importantly, is he diverting your excess water to a suitable outlet? Purposefully diverting water to a neighbor's yard, when runoff didn't already naturally flow to that yard, can result in huge fines. As the property owner, you will be held responsible for your contractor's end result.

Equipment, Supervision & Project Site Management: Find out who will supervise the work and how often will they be onsite to see that the plans are followed? Will the project continue daily until finished without interruption other than weather delays? You need to know who to call if you have a question or problem. Furthermore, does your contractor have access to the equipment needed to get the job done?

Products: Which products does the contractor use and are they the best in the industry? Be wary of contractors that offer a big discount because they will use materials left over from a previous job. While you may be interested in saving a few bucks, are you certain these materials are suitable for you project and needs? Having the project done with substandard materials that will not last never ends well for the property owner. You might have to have the system torn up and reinstalled a couple years later, costing you double down the road.

Warranty: Make sure there is some sort of a warranty with your drainage system installation once it is complete. More importantly feel confident enough with the company that they will even be in business to fulfill that warranty agreement. See if they can give you a past customer that you can call to talk to where they had a warranty issue that the contractor successfully resolved for them. Many specialized drainage companies offer a minimum of a 12-month warranty of full functionality, some contractors offer more.

Warning: We know of a family who hired a contractor that a friend's neighbor had used. Although they met with him and thought he seemed like a "good guy," they did no research on him or his business and references were not checked. After realizing that no real progress had been made in spite of the thousands of dollars they had paid him, they began to investigate. As it turns out, the friend's neighbor had had similar complaints and was dissatisfied. If the homeowners had spoken to the people for whom the contractor had worked, rather than going by their impression of his personality, they would have been spared a good chunk of change. In addition to leaving their home a complete mess, they lost all the money initially invested and had to pay someone else to finish the job. Furthermore, because they had not done their due diligence regarding the contract, they had little legal recourse. The lesson: always err on the side of caution! Do not assume that a contractor has your best interests at heart; look at their previous jobs and, if possible, consult people for whom they have worked. Most people are happy to tell you about their experiences with a business, whether good or bad, and businesses with a solid reputation are not wary of you seeing their previous work.

Copyright © 2010 Team Green Outdoor Inc. All rights reserved

Proper Land Drainage is Important!

Drainage Team has been a leader for complete drainage solutions and erosion control excellence in the St. Louis Missouri area for over 10 years. Drainage Team has the knowledge and resources to resolve any exterior rain water drainage issue for both residential and commercial clients. Drainage Team performs projects from the installation of downspouts to designing complete landscape erosion control systems; we will resolve your landscape drainage issues, your foundation drainage issues and water problems with a guarantee. Drainage Team offers solutions such as downspout piping; french drains, surface/ subsurface drainage, pond edge stabilization systems, surface grates, channel drains, erosion control solutions, and complete water management solutions/ services for St. Louis Missouri. "Research our Reputation, we are the Solution."

Contact us at http://www.DrainageTeam.com.

Relate Link Discount Ergo Baby Bc4Tol Organic Twill Cranberry Baby Carrier With Nautilus Print Lining And Led Sa